Contains:
> 1pc combination plers 7″ 180mm
> 1pc 650W hammer drill: 220-240VAC,50~60Hz, 13mm chuck
1pc side handle
1pc depth guage(plastic)
> 1pc claw hammer 8 OZ
> 1pc adjustable wrench 6″160mm
> 2pcs screwdrivers: SL5.5x100mm, PH1x100mm
> 1pc screwdriver bit holder
> 1pc voltage tester 3x140mm
> 1pc insulating tape, red
> 1pc screwdriver bit holder 1/4″x60mm
> 4pcs HSS dril bits: 3*61mm; 4*75mm; 5*86mm; 6*93mm
> 4pcs wood drill bits: 4*75mm; 5*86mm; 6*93mm; 8*117mm
> 4pcs masonry drill bits: 5, 6, 8, 10mm
> 1pc measuring tape 3Mx16mm
> 1pc mini spirit level 22.5cm/9″
> 1pc snap-off blade knife
> 20pcs Cr-V screwdriver bits 1/4″x25mm:
SL4, SL5, SL6, SL8
PH1, PH2, PH3
PZ1, PZ2, PZ3
H3, H4, H5, H6
T10, T15, T20, T25, T27, T30
> 70pcs nails and screws set packed in plastic case contains:
> 70pcs nails set:
10pcs iron nails 1.5″
10pcs steel nails 1.5″
10pcs chipboard screws 4x30mm
10pcs plastic screw plugs 5x25mm
10pcs plastic screw plugs 6x30mm
10pcs self-tapping screws ST2.9x25mm
10pcs self-tapping screws ST4.0x30mm
> Packing: blow mould case
| STOCK NO. | QTY./CARTON |
| 156316 | 2 |
Related Products
> 10pcs 3/4″ Cr-V sockets: 22, 24, 27, 30, 32, 36, 38, 41, 46, 50mm;
> 1pc Cr-V sliding bar 450mm (18″)
> 1pc Cr-V extension bar 200mm (8″)
> 1pc Cr-V extension bar 400mm (16″)
> 1pc Cr-V ratchet handle
> 1pc Cr-V universal joint
> Packing: steel box with color sleeve
100 in stock
> Material:40Cr
> Ergonomic plastic Handle
> Packing: Double blister
100 in stock
> CE approved
> Voltage: DC 3.6V
> Power: Li-ion, 1300mAh
> No-load speed: 180rpm
> Max torque: 3N.m
> Chuck: 1/4″(6.35mm)
> Charger: AC100-240V, 50/60Hz Europlug
> Charge time: 3-5 hours
> Switch: forward & reverse
> 18pcs 25mm screwdriver bits:
Philips: PH0, PH1, PH2
Pozidriv: PZ0, PZ1, PZ2
Slot: 3, 4, 5
Hex: H2,H2.5,H3,H4
Torx: T8,T10,T15,T20,T25
2pcs 50mm screwdriver bits:
Philips: PH2
Slot: 4
> 3pcs HSS twist drill bits: 2, 2.5, 3mm
> 1pc 60mm mannetic bit holder
> Packing: double blister
100 in stock
> CE APPROVAL
> IEC-61010 CAT III(600V)
> Large 1-2/3″ LCD display
> Data Hold : 1999 counts
> AC Current: 2/20/200/600A±(3.0% +10)
> AC Voltage: 2/20/200/600V±(1.2% +5)
> DC Voltage: 200mV/2/20/200/600V±(1% +2)
> Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ±(2.0% +5)
> Diode Check approx: 1.5V
> Dimension: 280*78*35mm, Maximum opening size :24mm
> Net weight: 250g
> Batteries : 2*AAA(1.5V) included
> Test lead: Bend plug black & red
> Packing: color box
100 in stock
> Brushless Motor
> Voltage: 20V
> Square drive: 1/2″
> Max torque : 350 N.m (258ft.lbs.)
> No load speed(variable speed):
0~1600/0~2000/0~2500min-1
> Impacts Per Minute (variable speed):
0~1800/0~2500/0~3300ipm
> Standard Bolt: M10-M20
> High Tensile Bolt: M10-M16
> Integrated LED light
> 20V Lithium-Ion 2.0Ah batteries
> With 2pcs battery pack
> LED battery power indicator
> With 1pc fast charger
> Charge volts: 220-240V~50/60Hz
> Integrated work light
> Packed by canvas bag and color box
100 in stock
> Packing: carton box(737712,737720)/wooden box(737730)
100 in stock
> Brushless Motor
> Voltage: 20V
> Shear capacity: 0-25/0-30mm(3/4″~1-3/16″)
> Tool Only; Battery and Charger not included
> Packing: color box
100 in stock
> Weight: 78.5kgs
> Rotor diameter: 91cm(36″)
> Blade number: 4 pieces (INCLUDED)
> Finish blade: 35x15cm(6×14″)
> Packing: carton box
100 in stock
> 13TPI 65Mn blade
> Thickness: 0.9mm
> Size of the mitre box: 300x140x70mm
> ABS material
> Packing: color sleeve
100 in stock
> Material:40Cr
> Ergonomic plastic Handle
> Packing: plastic hanger with color label
100 in stock
> CE Approved
> IEC61010 600V CATIII
> 31/2 digits LCD, Max.reading 1999
> Large LCD display
> Low Battery indication
> Overload protection
> Data-hold mode
> Auto power off
> SPECIFICATIONS
> DC Voltage: 200m/2/20/200/600V
> AC Voltage: 200/600V
> DC Current: 400μ/2m/20m/250m/10A
> Resistance: 200/2k/20k/200k/2MΩ
> Packing: color box
100 in stock
Reviews
There are no reviews yet.